Flooring Materials
Mapei Ultrabond Eco S955 1K Single Component Adhesive 15kg Special Offer
FREE UK Delivery On orders over £250net*
Need some help? Call us on 0330 320 1223

Mapei Ultrabond Eco S955 1K Single Component Adhesive 15kg

by Mapei

Brand Mapei

For Bonding Pre-Finished Wooden Floors, Lamparquet, Slats, Floor-Boards And All Types Of Parquet

A One-Component, Sililated Polymer-Based Adhesive

Very Low Emission Level

Easy To Apply With Excellent Ridge Holding

20-30% More Yield Compared With Conventional Two-Component Adhesives

Size: 15kg Tub

Coverage: 800-1200 g/m²

Product Code Price Quantity
074315

£108.00 INC VAT

£90.00 EX VAT

was £94.99 EX VAT

Work out how much you need

Using the calculator below, you can work out how much material you will need to get the job done. Please either enter your required area m2 or the width and length.

This is a rough guide calculation provided in good faith, actual usage may vary, please allow for wastage when placing your order. Flooring Materials Ltd can't be held responsible for any under ordering.

Description

Ultrabond Eco S955 1K is a one-component, sililated polymer-based adhesive without water, or solvents (according to TRGS 610), with a very low emission level of volatile organic compounds (EMICODE EC1 Plus). It is manufactured according to a technology developed in MAPEI’s own research laboratories and has the following characteristics:
▪  One-component, ready-to-use product; no catalyser is required, therefore no mixing. If stored correctly, the remaining quantities of the product may be used again at a later date.
▪  GEV is certified, as a product with a very low emission level of volatile organic compounds (EMICODE EC1 Plus)
▪  Compatible with Ultracoat water-based varnishes and bases and the oils from the Ultracoat range
▪  No hazard or risk statements or symbols.
▪  Easy to apply with excellent ridge holding.
▪  20-30% more yield compared with conventional two-component adhesives, thanks to its low viscosity and free-owing properties when applied by trowel.
▪  Totally free of solvents (according to TRGS 610)
▪  Easy to remove from pre-finished elements.

Ultrabond Eco S955 1K is used for bonding pre-finished wooden floors, lam parquet, slats, floor-boards and all types of parquet on cementitious screeds, screeds made using Mapecem, Mapecem Pronto, Topcem, Topcem Pronto and similar products, old wooden floors, ceramic, marble, terrazzo, etc. and anhydrite screeds. It is also suitable for heated substrates.

Specification

Consistency: Creamy Paste.
Colour: Beige or Crown.
Density: 1.65 ± 0.05 g/cm³.
Dry Solids Content: 98%.
Brookfield Viscosity: 35,000 ± 5,000 mPa·s (rotor 7 - 50 rpm).
EMICODE: EC1 Plus - Very Low Emission.
Recommended Application Temperature Range: From +10°C to +35°C.
Open Time (formation of surface skin): 40 minutes.
Adjustment Time: 120 minutes.
Set To Light Foot Traffic: Approx. 12 hours.
Polishing: After 3 days.
Size: 15kg Tub.
Coverage: 800-1200 g/m².