Mapei Ultrabond Eco 4 LVT Fibre-Reinforced High Temperature Adhesive 15kg
by Mapei
Fibre-Reinforced High-Temperature LVT Adhesive
Particularly Suitable For Heavy Wear Use In Domestic, Commercial And Industrial Locations
Ready To Use
Specifically Developed For LVT In Tiles And Planks
Fast And Strong Initial Grab And A Rapid Set
Size: 15kg Tub
Coverage: Between 200-300g/m²*
| Product Code | Price | Quantity |
|---|---|---|
| 0666215 |
£79.19 inc VAT
£65.99
ex VAT
|
|
Work out how much you need
Using the calculator below, you can work out how much material you will need to get the job done. Please either enter your required area m2 or the width and length.
This is a rough guide calculation provided in good faith, actual usage may vary, please allow for wastage when placing your order. Flooring Materials Ltd can't be held responsible for any under ordering.
Description
Ultrabond Eco 4 LVT is a fibre-reinforced synthetic polymer-based adhesive in water dispersion, formulated in a ready-to-use light beige paste. Specifically developed for LVT in tiles and planks, it is characterised by a fast and strong initial grab and a rapid set, as well as a rigid and cohesive final film, which gives the floor covering very good dimensional stability.
Highly shear resistant, hard set, wet-bed, high-temperature dispersion adhesive, specific for LVT floorings. For use on floors and walls in interior applications. Suitable on:
▪ level, absorbent substrates
▪ underfloor heating systems.
Improved by the addition of fibres, therefore particularly suitable for heavy wear use in domestic, commercial and industrial locations, e.g hospitals, shopping centres, airports, etc.). It can be used for the installation of flooring subjected to stresses from chair castors according to EN 12529.
Product Properties:
▪ Very easy to apply.
▪ Low to no waiting time.
▪ Excellent initial grab even with difficult coverings.
▪ Very good peel strength.
▪ Highly shear resistant.
▪ Very good dimensional stability.
▪ Prevents open joints.
▪ Exposure to castor wheels in accordance with EN 12529.
▪ Not inflammable.
▪ EMICODE EC1 Plus (very low emission).
▪ Blauer Engel DE-UZ 113.
Specification
Consistency: Creamy Paste.
Colour: Pale Beige.
Density (g/cm³): 1.20.
pH: 7.5.
- EMICODE: EC1 Plus - very low emissions.
- Blauer Engel: DE-UZ 113.
Application temperature range: from +15°C to +35°C.
Waiting time: 0-10 minutes.
Open time: 20-30 minutes.
Set to light foot traffic: 3-5 hours.
Ready for use: 24-48 hours.
Size: 15kg Tub.
Coverage: Between 100-300g/m²* (Consumption varies with uniformity of substrate, the back of the flooring and the type of trowel used)