Larsen Acrylic Primer (Ready To Use Tile Primer) 5Ltr
by Larsen
Water-Based Polymer Emulsion
Ready To Use Primer
Improved Adhesion
Coloured To Indicate Application
Size: 5Ltr
Coverage:~
- Neat: 1 Litre Will Cover Approx. 7 – 10m²
- Diluted 1:1 With Clean Water: 1 Litre Will Cover Approx. 14 – 20m²
| Product Code | Price | Quantity |
|---|---|---|
| WBRM901 05 |
£22.79 inc VAT
£18.99
ex VAT
|
|
Work out how much you need
Using the calculator below, you can work out how much material you will need to get the job done. Please either enter your required area m2 or the width and length.
This is a rough guide calculation provided in good faith, actual usage may vary, please allow for wastage when placing your order. Flooring Materials Ltd can't be held responsible for any under ordering.
Description
Acrylic Primer is a ready-to-use primer for use on porous and difficult substrates prior to tiling or screeding, or to seal gypsum plasters or screeds prior to the addition of cement-based adhesives.
It can be used neat when sealing substrates or diluted with an equal quantity of water for general priming.
• Water-based polymer emulsion.
• Ready to use primer.
• Improved adhesion.
• Coloured to indicate application.
Specification
Form: Water Based Liquid.
Colour: Pink.
Hazard Information: Water Based, Material Is Generally Considered Non-Hazardous.
Density: 1.01-1.03g/ml.
pH: 7.0-9.0.
Dry Matter Content: ca.20% By Weight.
Drying Time: Touch dry in less than 1hr on porous substrates. Overcoat: 2-4hrs @20°C.
Underfloor Heating: Suitable for use with heated concrete and cement screeds up to a maximum surface temperature of 35°C.
Storage & Shelf Life: Store in sealed containers in dry conditions, protected from extremes of temperature. Lasts up to 18 months in good storage conditions.
Coverage:
- Neat: 1 Litre Will Cover Approx. 7 – 10m².
- Diluted 1:1 With Clean Water: 1 Litre Will Cover Approx. 14 – 20m².