Menu
Call Us
Flooring Materials
SALE
Help
Login
Basket
Larsen LLC206 NA Protein Free 2-Part Latex Levelling Compound 20kg Half Pallet (20 Bags Tail Lift)
FREE Delivery over £299
Need help? 01604 915243

Larsen LLC206 NA Protein Free 2-Part Latex Levelling Compound 20kg Half Pallet (20 Bags Tail Lift)

Half Pallet 20 x 20kg Bags & 4.5 Litre Bottles

High Performance

Excellent Adhesion

Rapid Set & Drying, Install As Soon As 4-6 Hours*

Low Odour (No Ammonia)

Bed Thickness Up To 10mm (Up To 30mm When Bulked Out With 3mm Aggregate)

Size: 20kg Bag & 4.5L Bottle

Coverage: One Pack Will Cover Approx. 4.5m² @ 3mm

Product Code Price Quantity
WBRM327 25 + WBRM327 05 (Half Pallet)
£492.00 inc VAT £410.00 ex VAT

Description

Half Pallet 20 x 20kg Bags & 4.5 Litre Bottles

Larsen LLC206 NA is a moisture-tolerant, protein-free 2-part latex levelling compound with superior flow and rapid setting characteristics. It exhibits excellent adhesion and has high flexibility, allowing it to be used over most old adhesive residues and onto most substrates without the need for priming.

Larsen LLC206 NA can be used over or under Larsen DPM and can be used from the feather edge up to 10mm and up to 30mm when bulked out with 3mm aggregate.

PRIMING
Priming of most substrates is generally not required. If the substrate is particularly porous, it is often beneficial to apply 1 coat of Larsen Acrylic primer diluted 1:1 with clean water, or alternatively, one coat of LLC206 NA Liquid component diluted 1:1 with clean water. Gypsum substrates must be dry (less than 0.5% moisture) and sealed with 1 coat of Larsen Acrylic primer diluted 1:1 with clean water, followed by 1 coat of Acrylic primer applied neat and allowed to dry.

APPLICATION
Pour the mixed product over the floor and spread it out to a smooth finish with a trowel. Where necessary, release air bubbles with a trowel or spiked roller. This practice must be carried out within 5 minutes of application. Should any trowel marks remain, remove with a wet trowel after the product has reached initial set. LLC206 NA can be applied from the feather edge up to 10mm. For thickness of up to 30mm, the product may be bulked out with an equal volume of 3-6mm aggregate. This economical application may require a further application of the standard mix to give a smooth finish. In this case, it is advisable to prime with Larsen Acrylic primer between layers. LLC206 NA will accept foot traffic after 1-2 hours. Floor coverings can typically be installed after 4-6hrs depending on the thickness of the LLC206 NA substrate and site conditions.

Please Note: This product is a direct replacement for Larsen Lartex NA.

Specification

Form: Grey Granular Powder and White Latex Liquid.
Maximum Aggregate Size: 0.6mm.
Hazard Information: IRRITANT – Consult Safety Datasheet before use.
Mix Proportions: One 4.5L Liquid Per 20kg Bag.
Application Temperature: +5°C to +30°C.
Working Time: Approx. 30 Minutes.
Time To Traffic: Light Foot Traffic after 1-2 hours. Covering from 4-6 hours.
Bed Thickness: Up to 10mm (Up to 30mm when bulked out).
Coverage: One Pack Will Cover Approx. 4.5m² @ 3mm.
Shrinkage: <0.1%.
Screed Strength Class (BS EN 13813): CT-C20-F7.
Screed Compressive Strength: > 20 MPa.
Screed Flexural Strength: >7 MPa.
Size/Packaging: 20kg multi-wall paper sacks & 4.5L plastic jerry can.
Storage & Shelf Life: Store in sealed containers in dry conditions, protected from extremes of temperature. Minimum 6 months shelf life in unopened manufacturer's containers.

Related products