Ardex Arditex NA 2-Part Rapid Setting Latex Self Levelling Compound 20kg
by Ardex
Ultra Rapid Setting Latex Subfloor Levelling & Smoothing Compound
Excellent Adhesion To Almost All Substrates Without Priming
Suitable For Use With Underfloor Heating
Unaffected By Moisture
Install Floorcovering From 3 Hours
Coverage: Approximately 5m² @ 3mm Thick Per Unit
Size: 20kg Bag & 4.85kg Bottle
| Product Code | Price | Quantity |
|---|---|---|
| 18288-0 |
£37.19 inc VAT
£30.99
ex VAT
was
|
|
Work out how much you need
Using the calculator below, you can work out how much material you will need to get the job done. Please either enter your required area m2 or the width and length.
This is a rough guide calculation provided in good faith, actual usage may vary, please allow for wastage when placing your order. Flooring Materials Ltd can't be held responsible for any under ordering.
Description
The Original Yellow Bag® ARDITEX NA® Levelling and Smoothing Compound saves you both time and money by removing the need for intensive preparation and priming. Its renowned versatility and advanced site tolerance reduces preparation machinery hire costs, lost time and call backs, helping to ensure that with ARDITEX NA®, there really is no alternative.
ARDITEX NA is a self-smoothing, protein-free, latex levelling compound with improved flow and excellent adhesion, flexibility and moisture resistance. These unique properties ensure that ARDITEX NA can be used with confidence over almost all subfloors without priming, including ceramic tiles, bitumen and flooring-grade plywood. Resilient floor coverings can be installed after just 4 hours, and ceramic tiles in as little as 3 hours.
• Apply directly to almost all substrates without priming, including old adhesive residues, bitumen, flooring grade plywood, ARDEX Damp Proof Membranes, ceramic and thermoplastic tiles and even steel.
• Unaffected by moisture and can be used directly to damp concrete.
• Install floor coverings after 4 hours and ceramic tiles after 3 hours.
• Apply from feather edge to 12mm neat, and up to 30mm incorporating an equal amount of ARDEX Coarse Aggregate.
• Walk on after 2 hours.
• Convenient bag and bottle mix with no measuring or water required.
• Advanced performance, even at lower temperatures.
• Suitable for use with underfloor heating.
Specification
Bulk density of powder: approx. 1.3kg/litre.
Initial Set (Vicat): approx. 1 hour.
Final Set (Vicat): approx. 11/2hours.
Compressive Strength, After 28 days: approx. 16 N/mm².
Flexural Strength, After 28 days: approx. 5.5 N/mm².
Indentation Resistance:
• 24 Hours 15N/mm²
• 7 days 25N/mm²
Typically, floor coverings range between 0.5 - 6N/mm².
NOTE: 1N/mm² is the equivalent to approximately 100 Tonnes/m².
Coverage:
• 2mm Thickness: 7m² Per Unit.
• 3mm Thickness: 5m² Per Unit.
• 5mm Thickness: 3m² Per Unit.
• 8mm* with ARDEX Aggregate: 3m² Per Unit.
• 10mm* with ARDEX Aggregate: 2.3m² Per Unit.
Storage & Shelf Life: ARDITEX NA powder has a storage life of not less than 12 months if stored in dry conditions. ARDITEX NA latex has a storage life of 9 months in a sealed container if stored in frost-free conditions, out of direct sunlight.
